Signals and Lighting
Novax - LED Street Lighting
Apollo Series
LED Ped Signal
with countdown
LED Traffic Signals
Cabinets - Accessories
UPS Pedestal - 322
UPS Pedestal - M
EZ Router
Cabinets - Pole
Models F,B & G
NEMA TS2 Two Phase
Series II Controller
Cabinets - Pedestal
322 Type
NEMA TS1, TS2-1, TS2 - 2
Model 401 C,D,R & S
Traffic Control
Model 6905
Series II Controller
Fire Hall Signals
Series II Controller
Pedestrian Crossing
Series II Controller
Ramp/Parkade Access
TransPOD
eMVPOD
METROTag
BUSplus
Priority Signals
DS 100 Series
DS 101-DC
Audible Warning Series
Audible Signals
Advanced Pedestrian Systems
SOUNDSAFE
Series APS
VB3
Sound System
DS3000
Series
Transit Priority Equipment
MetroTag™ Transponder
METROTag™ is a transit signal priority system that provides priority for buses and other transit vehicles to pass through traffic signal controlled intersections with minimal delay to facilitate transit efficiency and improve service delivery. A highly accurate in-ground inductive loop system is utilized to achieve this result.
MetroTag™ Specifications
Specifications
• Dimentions: Cylindrical Assembly D x H = 114 mm x 63 mm (4.5” x 2.5”).
• Voltage: 11.5 - 14.8 Volts Direct Current (DC)
• Current: Less than 1 Ampere DC
• Operating Temperature: -40 °C to 80 °C ( -40°F to 176°F)
• Operating Humidity: 98 % R.H. Condensing
• Power Cable: 12 feet (3.6 meters 4 wire). In-Line Fuse at power feed end.
• Weight: Approximately 1.6 kg (3.5 pounds)
• Transmission Rate: 56kHz carrier (with less than 200Hz variance).
• Mounting Location, Mounting Height: Horizontal and parallel to the road surface, perpendicular to vehicle travel. Within 61 cm (2 feet) of the road surface.
• Water Resistance: The Novax SRM – MetroTag™ transponder shall withstand a 60°C (140°F) water blast of 10GPM at 60 psig directed perpendicular to the cylindrical body from a distance of 1.8 meters (6 feet) for a period of 12 hours with no measurable degradation to the operation.
• Housing Materials: The Novax SRM – MetroTag™ transponder assembly is embedded within a welded PVC- S40 housing. The connector is an anodized aluminum Military grade connector hermetically sealed i inside and out to prevent moisture and contaminate intrusion.
• Model Number: Model TTC-QX4
